1  2  3  4  5  6  |   Order by default

Aug 12, 2003, 8:32am

yeah what a shame, Lotto could have been ok but fuckem
Lotto, you done pissed off somebody that don't need a bot at GZ.
Work on me some more please Lotto?

[View Quote]

Aug 12, 2003, 8:46am

Lotto?
still here?

Oh don't ask, I'll be what I can be

[View Quote]

Aug 12, 2003, 8:36am

Where the hell did Lotto go?

Aug 12, 2003, 8:38am

come on sweetie, whisper your little perverted remarks to me
.....wanted to congratulate lotto on kicking me around, but not my ass.

[View Quote]

Aug 12, 2003, 8:49am

Good Luck and better time at the next one you get to use and I don't.

[View Quote]

Aug 12, 2003, 8:50am

ever had a 8 stamped to your butt?....nope I can't do it, nor they wouldn't
do it to me either and whoever ends up with my number,,,,,,,,,,,good look

[View Quote]

Aug 12, 2003, 10:10am

no, Lotto will not be a pervert with me around! He has to know i'm pissed.
let him knaw on the wheels or something lol.

[View Quote]

Aug 12, 2003, 10:07am

Seem you have universal rights, who the hell is this person that makes it
right

Aug 12, 2003, 10:13am

Lotto did this to me

[View Quote]

Aug 12, 2003, 10:16am

speak up Daphne, you were damn you were fast to get me ejected over a homo
subject with Lotto, that he doesn't admit,,,,,,,,,rememeber, you picked me
out of a crowed and ejected me for speaking up
Piss on you Daphne
I'll be here

[View Quote]

Aug 12, 2003, 10:17am

Zandorfa speaks

[View Quote]

Aug 12, 2003, 10:54am

wtg Zan yayyyyyyyyy
even your memories kick ass hahaha
Eep stood up to her Daphne, not you,
Piss on you
[View Quote]

Aug 12, 2003, 10:58am

really want Eep in here?
Zis one for you hun

[View Quote]

Aug 12, 2003, 10:11am

you can thank the hell out of Lotto

[View Quote]

Aug 12, 2003, 11:05am

not a ejectable offence I think...........you know me as an asshole, I can
be the asshole of the assholes, Daphne, why me all of of a sudden you come
out of your little hole, and what you ejected me over was not called for.

Aug 12, 2003, 11:07am

I do demand an explanation for my ejections which I haven't seen a report
on...


Piss on you too

[View Quote]

Aug 12, 2003, 12:21pm

wait til I post one of your pictures in here that Zan gave me. Piss me off
Daphne

[View Quote]

Aug 13, 2003, 7:07am

Not CitBingo, this one with no warning

*********************************************************
* Active Worlds chat session: Tue Aug 12, 2003 10:38 AM *
*********************************************************

Immigration Officer: Welcome to the AW Universe! Reminder: Sharing Priv
Passwords, changing your citizenship email address to someone else's or
clicking on .EXE URL links may compromise the security of your citizenship.
Immigration Officer: Welcome to Connections...a Friendly Place to Connect
with Friends and Lovers :`)
Immigration Officer: Welcome to Alphaworld! :) - The largest building world
in Cyberspace
[Customs Aide]: Welcome, Weebo. For the Conduct Guidelines please say World
Rules or see http://www.activeworlds.com/community/conduct.asp
Weebo: Lotto you here?
Lotto: what?
Weebo: what we need to do to transfer the accounts over
Veger: Hello PeeWee
Lotto: and how we do that?
Weebo: hey Veger, fixing to give my accounts away
Lotto: hello, Veger :)
Veger: and why are you doing that Weebo?
IHNK: what?
IHNK: weebo?
Weebo: cause I can
IHNK: ur giving what accts away?
Veger: shut up IHNK
Weebo: Lotto you ready?
Lotto: ok
IHNK: weebo
IHNK: what are you doing?
Weebo: giving Lotto my accounts
IHNK: why?
Veger: whats wrong my friend?
Weebo: (to Veger) oh way too late for that shit
Immigration Officer: You have been ejected from aw
Immigration Officer: Welcome to Connections...a Friendly Place to Connect
with Friends and Lovers :`)
Immigration Officer: No response to request to join Mountain Myst.
Immigration Officer: You have been ejected from aw
Immigration Officer: You have been ejected from aw
Immigration Officer: You have been ejected from aw
Immigration Officer: You have been ejected from aw
Immigration Officer: You have been ejected from aw

[View Quote]

Aug 12, 2003, 9:31pm

Well is was fun while it lasted, time to go back to my prior aw habits.
I been tossed out of every chat place on the internet except this one.
Things do change hahaha.
[View Quote]

Aug 15, 2003, 3:13am

Oh Goobs, even if I have pissed you off in the past, I do fully understand
:) Mine stopped this week. I'm just waiting on some confirmations before I
walk the long walk. There is a lot more that goes on in the community behind
the scenes that folks don't see that actually should be posted so everybody
understands. I do have to admit you gave it your full best and are highly
respected to the utmost in my books. Here is some Golddust for your Good
Luck.
Job Well Done Goober King!
Weebo

[View Quote]

Aug 15, 2003, 5:41pm

I have been modeling since modeling classes were offered to the general
public.
I have also been programming since the late 70's. In my day, it was hard to
find a modeler that could program using lisp. As I told somebody in an
email, I have been building computers also since the first high speed data
aquisition device. See if you can find anybody that knows how to "wire a
chip".
Have a nice day.
Weebo
[View Quote]

Aug 19, 2003, 4:34am

Let me give you a cit that will last a bit,
Weebo
[View Quote]

Sep 19, 2003, 2:07am

Great site Robbie and easy to navigate too...thanks :)
Weebo
[View Quote]

Oct 3, 2003, 9:07pm

It was nice meeting you HenrikG and hopefully you will watch the NG to see
an upcoming event or 2 to come back in and say hello...there is another
Reunion coming up in August, 2004 if i'm not mistaken...let me get you the
URL in case if you want to pop in :) The page isn't finished yet but we're
working on it.
AW Reunion 2004
http://www.majesticmatrixx.com/awr04/index.html
Have a nice day and Thanks for all you have done HenrikG...
Weebo

[View Quote]

Oct 23, 2003, 5:00pm

> I wonder what causes this? Windows thingy?
> Thanks and thanks everyone else also:)
> Bit:)

The Halloween Ghost of Harold.
Weebo

Oct 26, 2003, 7:09pm

yayyyyyy wtg Tengel :)
LOL
Weebo
[View Quote]

Nov 4, 2003, 9:17pm

I just went thru this with somebody and this is what we did. If this don't
fix it we can try something else lol. Have both computers set subnet mask to
255.255.0.0 and put the default gateways to identical, ex: if default
gateways is 221.52.40.1 then make sure or set both computers to have it set
same...both computers should have identical subnet mask and default gateway
(this is assuming they have more than 1 IP#) otherwise it would be the
configurations in the router vs the computers.

Weebo

[View Quote]

Nov 4, 2003, 9:27pm

It would also be nice if AW would set up a world just for world owner
support for tips, things to try, troubleshooting, and possibly in the World
FAQ section for troubleshooting tips. Something like that lol.
Weebo

[View Quote]

Nov 4, 2003, 10:21pm

This is done thru the internet connection properties internet protocol
Can be checked by right mouse clicking on the double monitor icon.
Can be changed thru your Internet Protocol properties.
Below is a simple standard setup for routers.

[View Quote] Gateway - Any hardware or software that is used for the purpose of providing
access from one system to another

Subnet Mask - A bit mask used to select bits from an Internet address for
subnet addressing. Also known as Address Mask.



Step 1: Determine if your Cable/DSL modem uses DHCP or a fixed address.
Before you begin setting up the router, you should know if your cable or DSL
modem uses Dynamic Host Configuration Protocol (DHCP) to supply an address
to your computer or if your Internet Service Provider (ISP) has given you a
fixed network address. DHCP is a method in which the device attached to the
modem (in this case, the router) asks the modem for the address to use when
communicating on the Internet. Each time the router is restarted, the modem
may supply the router with a different address. If your ISP does not support
DHCP, then they would have given you a specific IP address when they setup
your connection. An IP address will be a series of 4 numbers between 0 and
255, separated by periods, such as 192.168.10.123. If you are unsure, call
your ISP. Almost all cable ISPs use DHCP.



Step 2: Configuring the router for DHCP or fixed address. All routers will
have their own unique configuration user interface. A common aspect of these
interfaces is that many of them are available using a web browser. If your
router doesn't have a browser interface, you will have to install the
setup/configuration software that came with the router. Again, you will have
to read your manual.

Once you are familiar with the router's configuration interface, go to the
screen/page that allows you to enable or disable DHCP. Note that the router
is not only a DHCP client to the modem, but also a DHCP server to all the
PCs connected to it. You are looking to change the DHCP settings for the
router to the modem (may be listed as "WAN configuration?.

When you have found the correct section of the configuration, either enable
DHCP or disable it and enter the specific IP address that you received from
your ISP. IMPORTANT: after you save your changes to the router
configuration, you need to reset (power off/on) BOTH your router AND the
modem.

Other configuration options of the Cable/DSL router

Depending on the make and model of your router, there may be many other
features that can be configured to get the most from your router investment.
This section will briefly describe some of the features that are available
on some routers. You will have to refer to your router's manual to see if it
has any of these features and if so, how to use and configure them.

1.. Static IP Addressing: most all routers not only are DHCP servers, but
can also be configured to support computers or other devices that may have
static IP addresses. For example, you may have a network capable printer
that has a static address and would like to make it available to other
computers on the network. Your router should allow you to add static IP
addresses that will be recognized and serviced by the router.
2.. Internet Access Control: Some routers give you the ability to disallow
access to the outside Internet to specific computers connected to the
router. This control can be on/off all the time or be set to be unavailable
at specific times (such as during "working" hours). For home networks, this
feature can become useful if you need to control access to the Internet to
the younger members of the family.
3.. Support Personal Web Server: If you need to have a computer on your
internal network visible to the outside Internet, the router may support
this. This is useful only if you want to support a computer as a file or web
server. Obvious care is needed if this feature is used because it bypasses
some or all of the built-in firewall features of the router.
4.. Internet Access Monitoring: Less common on the less expensive routers
is the ability to monitor and track the activity of computers on the
Internet. This is a feature more often used by small businesses and less
often in the home network environment.
By no means is this an exhaustive list. Some routers (like the Linksys
BEFN2PS4) support additional features such as Internet long distance phone
features. If you require special features beyond the simple sharing of the
Internet connection, be sure to research the routers available before making
your purchase.

Nov 4, 2003, 10:45pm

Now since your computers and world server is up and running let's talk a
little about configuring the world server.
I have been told that running a server, you have to disable the firewall. I
do not agree with this. You can add the port(s) into the firewall allow in
Norton and mine worked fine unless there is another bug in the world server.
Some common issues in the world server/client is "...after I get my world
up, only I can enter." and "...after I get my world up, everybody else can
enter but me..." lol
Another thing that I have tried with firewalls is disabling it only until
the PPL entered then activated it while they were in the world. Not sure if
this is a good thing but is one that I tested. Here are some links I dug off
the AW World Server Help Pages:
http://www.activeworlds.com/help/aw34/install_win.html
http://www.activeworlds.com/help/aw34/admin.html
http://www.activeworlds.com/help/aw34/admin_multiple.html
http://www.activeworlds.com/help/aw34/world_options.html
It would be nice to see AW Support comment on this thread.
Hope some of this helps.
Weebo

[View Quote]

1  2  3  4  5  6  |   Order by default